mPCIe-DIO-24S: mPCIe 24 x Digital I/O Card w/CoS IRQ

ACCES: Committed to Service

We're here to help!

Let our amazing support staff help you with questions: whether finding the right model for you, or technical support on using the product - or figuring out what's wrong - we have the expertise to help you. Use it!

Call, E-Mail, or Chat, Today!

FEATURES

  • PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
  • 24 high-current LVTTL DIO lines (24ma source/sink)
  • Change-of-State (COS) detection IRQ generation
  • 10k ohm pull-up resistors
  • Four and eight bit ports independently software selectable for use as inputs or outputs
  • All signals brought out to optional panel-mountable 37-pin male D-Sub connector
  • RoHS standard
  • Available Now in M.2 form!
  • Designed, made, supported, and manufactured in the USA

FACTORY OPTIONS

  • Industrial operating temperature (-40°C to +85°C)
  • CMOS signaling with user supplied VCCIO (5V)
  • Support for Wind River VxWorks (call for ordering information)
Last updated on December 7, 2023, 12:01 pm

$208.00$238.00

In Stock

Description

The mPCIe-DIO-24S is a type F1 PCI Express Mini Card (mPCIe) and optional cable assembly (D-Sub 37-pin Male connector) designed to be easily panel-mounted in any application environment. It uses the high speed PCI Express bus to transfer digital data to and from the card. The digital I/O is compatible with 8255 PPI chips making it easy to program. This also allows for simple and trouble-free migration from other ACCES PCI and PCI Express digital I/O cards, but also provides for advanced features enabled by the onboard FPGA logic.

The card provides three 8-bit I/O ports designated A, B and C. Port C can be further divided into two 4-bit nybbles. Each port can be programmed as inputs or outputs. Change of State (COS) detection and interrupt capabilities are designed to relieve software from polling routines that can consume valuable processing time. Each port can be programmed for detecting state changes on their lines, in which any changes of the enabled port’s bits (low-to-high or high-to-low) will generate an IRQ. An ISR (interrupt service routine) then determines which bit changed state and clears the interrupt.

DigitalFeatures

DigitalFeatures (read as “Digital Integration Features”) are a new family of features available for applicable models of ACCES’ PCI Express (PCIe) and PCI Express Mini Card (mPCIe) Digital I/O product lines.

All the cards share features such as memory mapped registers for low-latency operation. Output channels support pulse/train / PWM / frequency / and quadrature generation. Inputs channels support flexible measurement of pulse duration, frequency, and event counting, with optional debouncing, IRQ generation, and more.

Applications

The mPCIe-DIO-24S is excellent for use in applications sensing inputs such as switch closures, 5V, LVTTL, CMOS logic and controlling external relays, driving indicator lights, and more. The mPCIe-DIO-24S can be used in the following markets.

  • Process Monitoring
  • Manufacturing/Production Test
  • Machine Control
  • Monitoring and Control
  • Security Systems, Energy Management
  • Industrial Automation
  • Factory Automation
  • Laboratory Automation
  • Embedded OEM

Special Order

Please contact ACCES with your precise requirement. Examples of special orders would be pull-down resistors, conformal coating, a CMOS version with user supplied 5VDC VCCIO, custom software or product labeling, and more. We will work with you to provide exactly what is required.

Accessories and Connections

Available accessories include a 40-pin to male DB-37 cable and screw terminal boards for quick and easy connectivity. I/O on the card is accessed via a 40-pin latching Molex connector. Alternately, custom hardware cables and/or interfaces can be produced to fit your specific application requirement.

SOFTWARE

The card is supported for use in most operating systems and includes a free DOS, Linux , and Windows 2000/XP/2003/Vista/7/8/10 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, and Visual C++ for Windows. Also provided is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from user level via an open source kernel driver. Third party support includes a Windows standard DLL interface usable from the most popular application programs, and includes LabVIEW 8.5+ VIs. Embedded OS support includes Windows XPe, WES7, WES8, vxWorks, etc. Full register-level documentation of all features ensures easy compatibility in any application environment.

Downloads

Data Sheets

Manuals

Software


Drivers and Downloads

Full list of available Downloads: Software Packages, Drivers, Manuals, and other documents

Information about our Free Software packages:

ACCES is proud to provide a full suite of software support with every Data Acquisition product. We are committed to supporting the most popular operating systems and platforms for our customers. Currently we are actively supporting XP -> 10, both 32 & 64 bit, including “Server 2008,” “Embedded,” and “Compact” flavors for all plug-and-play products including PCI, PCI Express, USB, and more. Many products continue to ship with support for additional operating systems such as DOS, Windows 95, 98, Me, NT4, and 2000.

Samples

Among the software we deliver with our products are sample programs in a wide variety of programming languages. These samples are used to demonstrate the software interfaces to our products — and many can be used as-is in your production environments, or to test functionality of the devices out-of-the-box. We’re currently actively supporting sample programs in Microsoft Visual C#, Visual Basic, Delphi, and Visual C/C++, with many devices including samples in Borland C/C++ 3.1 for DOS. Additionally we provide National Instruments LabVIEW compatible DLLs and many demonstration VIs for our devices.

Drivers

Drivers for various operating systems are also provided, including active support for Windows XP -> 10 — all in both 32-bit and 64-bit flavors, and including consumer, server, and embedded varieties — as well as the 2.6 and newer Linux kernels and recent OSX / macOS versions. Many products continue to ship with driver support for Windows 95, 98, Me, NT4, and Windows 2000, but support for these operating systems is considered deprecated.

Setup Programs and Utilites

Our Data Acquisition devices also include a graphical setup utility that walks you through the process of configuring any option jumpers or switches on the device, as well as explaining a little about the various connectors present.

Many devices also include utility programs – little tools to make your use of the device easier, such as EWriter, a program that allows you to read and write data in the user-accessible EEPROM locations on all our USB data acquisitition products; or WinRISC, a “Really Incredibly Simple Communications” terminal program that lets you get started instantly with serial devices.

“Register Level” Documentation

Besides all this software in all these languages and operating systems ACCES has a policy of open and transparent development: none of our lowest-level “register” interfaces are hidden from you — we document every register in every bus card, every command in every serial board, and every usb control transfer in every USB Data Acquisition board. These lowest-level interfaces allow you to develop for our products in ANY operating system or language, regardless of our actively supporting it or having a driver for it. We have customers actively developing in ADA, Android, Python, Java, MATLAB, Solaris, and more, just by referring to our complete low-level interface documentation! And we provide the full source code to all of our drivers, regardless of operating system, to give you an even bigger head start in your own development tasks.

No Fees or Royalties

All of this software is provided at no additional charge, and is licensed under any of a variety of flexible — and royalty free — options. Check out our software license explanation if you’d like more information.


Custom Software

ACCES also offers Custom Software Services for our products. Our prices are unbelievably low, often as inexpensive as free! If you need something tweaked to support your needs, or an entire enterprise application developed from scratch, it is definitely worth your time to inquire with us, first.

Further information about available ACCES Software:

Redistributing Windows Drivers
A list of ACCES drivers and the files that compose them under different versions of Windows, so you can easily redistribute ACCES cards and drivers.


aioWDM.VxWorks

ACCES has successfully partnered with Wind River to bring our entire line of PCI and PCI Express DAQ cards to VxWorks 7!

VxWorks 7 VxBus Gen 2 drivers, with easy-to-use API-libraries, are available for this product, including full source and sample code.

Designed to be compatible with our AIOWDM.dll Windows driver & API, this kernel module adds zero% CPU-cycle overhead to your VxWorks runtimes while allowing the lowest-latency hardware register access possible.

You can find more information about our VxWorks libraries and services on our Wind River Silver Partner page.

PC Interface

  • PCI Express Mini Card: Type F1 “Full Length” V1.2

Digital Input / Output Interface

  • Digital Bits: 24
  • Compatibility: 8255 Mode 0
  • Performance: 1 μs per 32-bit transaction max, ∼3.5μs in Windows
  • Digital Inputs
    • Logic High: 2.0V to VCCIO (3.3VDC, 5VDC tolerant)
    • Logic Low 0V to 0.8V
  • Digital Outputs (Standard Version)
    • Logic High: 2.0V (min) 24mA source
    • Logic Low: 0.55V (max) 24mA sink
    • Power Output: +3.3 VDC via 0.5A polyfuse (resetting)

Environmental

  • Temperature
    • Operating: 0°C to 70°C (order -T option for industrial temperature -40°C to 85°C)
    • Storage: -65°C to 150°C
  • Humidity: 5% to 95%, non-condensing
  • Power required: +3.3VDC @ 330ma (typical)

Physical

  • Weight:6.2 grams (plus 22.2g for the cable)
  • Size
    • Length: 50.95mm (2.006″)
    • Width: 30.00mm (1.181″)
  • I/O connector
    • On-card: Molex 501190-4017 40-pin latching
    • Mating: Molex 501189-4010
    • On cable: Male, D-Sub Miniature, 37-pin
    • Mating:Female, D-Sub Miniature, 37-pin

Regulatory Compliance

  • This product is designed to be in full compliance with CE requirements.
ModelDescriptionPrice (USD)
mPCIe-DIO-24

mPCIe 24 x Digital I/O Card, No CoS

$208.00
mPCIe-DIO-24S

mPCIe 24 x Digital I/O Card w/CoS IRQ

$238.00
Accessories
Cables for the mPCIe card
CAB-M.2-DB37M 40-pin to DB37-pin male cable $29
CAB-M.2-40P 40-pin to 40-pin discreet cable $29
Direct Connect
ADAP37F-MINI Screw terminal adapter with DB37 female connector $40
Cable Connect
CAB37-18 Ribbon cable, DB37 female to female connectors, 18″ $25
CAB37-36 Ribbon cable, DB37 female to female connectors, 36″ $29
STB-37 DIN-rail mountable screw terminal board with DB37 male connector $39
STA-37 Wireable screw terminal board with two DB37 Male connectors $79
mPCIe Card Mounting Hardware
M.2HDW-KIT2 2mm mounting hardware $1
Model Options (call for pricing)
-T Extended temperature operation (-40° to +85°C)
-TTL CMOS signaling with user supplied VCCIO (+5V)