PCIe-IIRO-16 PCIe Isolated Input Relay Card with COS
Features
- 16 optically isolated, non-polarized digital inputs
- Switchable filters on inputs for electrically noisy environments
- Optically isolated channel to channel and channel to ground
- Can detect input state change and assert interrupt
- 16 electro-mechanical relay outputs
- Automatically detected under Windows
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
$419.00
In StockDescription
This product is a x1 lane PCIe isolated digital input and relay output board with Change of State (COS) detection capabilities.
The isolated inputs can be driven by either AC or DC and are not polarity sensitive. Input signals are rectified by a diode bridge and applied to the inputs of opto-isolators. A 1.8k ohm resistor in series provides current limiting. Standard 12/24 AC control transmitter outputs can be accepted as well as DC voltages. The input voltage range is 3V to 31VDC (or 40-10kHz RMS). To extend the input voltage range, you may connect external resistors in series.
The electro-mechanical relay outputs of the PCIe-IIRO-16 are comprised of ten form C SPDT outputs and six form A SPST (normally-open) type. The relays are all de-energized at power-on. Data to the relays is latched.
The card is 6.6 inches in length and 4.2 inches seated height. I/O wiring connections for this board are via a 78-pin D-sub connector. A molded round-wire “Y” cable is typically used to connect this card to termination panels with two 37-pin D-sub connectors.
SOFTWARE
The card is supported for use in most operating systems and includes a free DOS, Linux, and Windows XP -> 10, both 32 & 64 bit compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, and Visual C++ for Windows. Also provided is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from user level via an open source kernel driver. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support includes Windows Xpe, WES7, vxWorks, etc.
Downloads
Data Sheets
Manuals
Software
- PCIe-IIRO-16 Software Package (27.64 MB -- Last Uploaded 2023-11-22)
Drivers and Downloads
Full list of available Downloads: Software Packages, Drivers, Manuals, and other documents
Information about our Free Software packages:
ACCES is proud to provide a full suite of software support with every Data Acquisition product. We are committed to supporting the most popular operating systems and platforms for our customers. Currently we are actively supporting XP -> 10, both 32 & 64 bit, including “Server 2008,” “Embedded,” and “Compact” flavors for all plug-and-play products including PCI, PCI Express, USB, and more. Many products continue to ship with support for additional operating systems such as DOS, Windows 95, 98, Me, NT4, and 2000.
Samples
Among the software we deliver with our products are sample programs in a wide variety of programming languages. These samples are used to demonstrate the software interfaces to our products — and many can be used as-is in your production environments, or to test functionality of the devices out-of-the-box. We’re currently actively supporting sample programs in Microsoft Visual C#, Visual Basic, Delphi, and Visual C/C++, with many devices including samples in Borland C/C++ 3.1 for DOS. Additionally we provide National Instruments LabVIEW compatible DLLs and many demonstration VIs for our devices.
Drivers
Drivers for various operating systems are also provided, including active support for Windows XP -> 10 — all in both 32-bit and 64-bit flavors, and including consumer, server, and embedded varieties — as well as the 2.6 and newer Linux kernels and recent OSX / macOS versions. Many products continue to ship with driver support for Windows 95, 98, Me, NT4, and Windows 2000, but support for these operating systems is considered deprecated.
Setup Programs and Utilites
Our Data Acquisition devices also include a graphical setup utility that walks you through the process of configuring any option jumpers or switches on the device, as well as explaining a little about the various connectors present.
Many devices also include utility programs – little tools to make your use of the device easier, such as EWriter, a program that allows you to read and write data in the user-accessible EEPROM locations on all our USB data acquisitition products; or WinRISC, a “Really Incredibly Simple Communications” terminal program that lets you get started instantly with serial devices.
“Register Level” Documentation
Besides all this software in all these languages and operating systems ACCES has a policy of open and transparent development: none of our lowest-level “register” interfaces are hidden from you — we document every register in every bus card, every command in every serial board, and every usb control transfer in every USB Data Acquisition board. These lowest-level interfaces allow you to develop for our products in ANY operating system or language, regardless of our actively supporting it or having a driver for it. We have customers actively developing in ADA, Android, Python, Java, MATLAB, Solaris, and more, just by referring to our complete low-level interface documentation! And we provide the full source code to all of our drivers, regardless of operating system, to give you an even bigger head start in your own development tasks.
No Fees or Royalties
All of this software is provided at no additional charge, and is licensed under any of a variety of flexible — and royalty free — options. Check out our software license explanation if you’d like more information.
Custom Software
ACCES also offers Custom Software Services for our products. Our prices are unbelievably low, often as inexpensive as free! If you need something tweaked to support your needs, or an entire enterprise application developed from scratch, it is definitely worth your time to inquire with us, first.
Further information about available ACCES Software:
Redistributing Windows Drivers
A list of ACCES drivers and the files that compose them under different versions of Windows, so you can easily redistribute ACCES cards and drivers.
aioWDM.VxWorks
ACCES has successfully partnered with Wind River to bring our entire line of PCI and PCI Express DAQ cards to VxWorks 7!
VxWorks 7 VxBus Gen 2 drivers, with easy-to-use API-libraries, are available for this product, including full source and sample code.
Designed to be compatible with our AIOWDM.dll Windows driver & API, this kernel module adds zero% CPU-cycle overhead to your VxWorks runtimes while allowing the lowest-latency hardware register access possible.
You can find more information about our VxWorks libraries and services on our Wind River Silver Partner page.
Digital Inputs
- Number of inputs: 16
- Type:Non-polarized, optically isolated from each other and from the computer. (not TTL/CMOS compatible)
- Voltage Range: 3 to 31V DC or AC (40 to 10 kHz)
- Isolation: 500V*(see manual) channel to channel and channel to ground
- Input Resistance: 1.8k ohms in series with two diodes and a photo-coupler LED
- Response Time: 10 mSec w/filter, 20 uSec w/o filter
Relay Outputs
- Number of outputs: 16
- Contact Rating: 2A carry current, bifurcated, gold clad, silver palladium
- Contact Arrangement: Channels 0-4 and 8-12 are SPDT Form C; channels 5-7 and 13-15 are SPST Form A.
- Contact Rating: Initial 100 milliohms maximum
- Contact Life: mech’l: 5 million operations minimum; elect’l: 5 million operations minimum at full load
- Operating Time: 2 milliseconds maximum
- Release Time: 1 milliseconds maximum
- Regulatory Approvals: UL and CSA
Interrupts
- Interrupts enabled by software, generated when digital inputs change state
Connector
- Back Panel DB37 Male
Power Required
- +5VDC @ 0.750 A (all relays ON)
Environmental
- Temperature: Operating 0 to +70°C
- Storage: -40 to +85°C
- Humidity: 0 to 90 percent (non-condensing)
- Weight: Approx. 8 oz. (227 grams)
- Size: PCIe-IIRO-16 is 6.15″ (156 mm) long
Regulatory Compliance
This product is in full compliance with CE requirements.
OEM and volume pricing available, please call us.
| Model | Description | Price (USD) | |
|---|---|---|---|
| PCIe-IIRO-16 | PCI Express Isolated Relay I/O Card | $419.00 |
| Accessories | ||
|---|---|---|
| CAB78-37/2 | $80 | 6′ round-wire “Y” cable, DB78 connector terminates in two DB37 female connectors |
| STB-37/2 Kit | $159 | Screw terminal kit includes two STB-37’s, one CAB78-37/2, and a one foot SNAP-TRACK |
| STB-37/2 Kit-CL | $178 | STB-37/2 Kit with four DIN clips for mounting theSTB-37/ SNAP-TRACK assembly to a DIN-Rail |
| STB-37 | $39 | DIN-Rail mountable screw terminal board with DB37 male connector |
| STA-37 | $79 | Wireable screw terminal board with DB37 male and female connectors |
| Model Options (call for pricing) | ||
| -RoHS | Call | RoHS compliant version |
| -T | Call | Extended temperature operation (-40° to +85°C) |